mCam100 allows video recording and panoramic image shooting  using pan/tilt functions; and local & remote still image capture. Its key feature enables control over LAN and/or internet IP address and also with a separate IR remote control / Keyboard. The USB camera does not require an external power supply. It is suitable for videoconferencing and internet chat; monitoring shops, offices and warehouses. mCam is an alternative to high-price CCD cameras but at affordable prices. "Watch the kids. Keep an eye in your home while you're away." To see a demo of the mCam 100, click here. Please note that this demo requires Internet Explorer for Windows. The demo will download the mCam 100 version 3 client to your computer. When it runs, you may get an error, but this is not important and may safely be ignored. Once the client loads, click the connect button and enter 'UplandComp' as the ID and '0000' (four zeros) as the password.

Specifications

Overview

Motion

Interface	RS-232 (Rx/Tx)
Motor	Geared Motor x2
PAN	180°
TILT	100° (with view angle)
Cable Length	3.0m
Dimensions	96.9(W) x 86.5(H) x 111(L) (mm), Weight 169g
Power Supply	5V DC, ±5% USB Power

Contents

mCam100 Camera
USB & RS232 Serial Cable (Both must be connected)
Remote Control
Manual
mCam100 Software Install CD

Environment

PC with available USB port and Serial port
Windows 98SE/ME/2000/XP
Pentium 300MHz (350MHz or above recommended)
64MB memory (128MB or more recommended)
CDROM drive
Available hard disk space of 100MB or more
800x600, 16bit color display (1024x768, 24bit recommended)
Graphic card with 8MB memory or more
Microsoft Outlook Express (for e-mail transmission of images  and video)
Windows compatible sound card, speaker and microphone
ADSL, Cable Modem or LAN above 128 kbps